April 15, 2007 (Vol. 27, No. 8)

RNAi Is Trying to Come Into Its Own with Novel Delivery Systems and Profiling Techniques

The emerging science of RNAi is tackling early hurdles and making strides to realize its potential for treating diseases ranging from cancer to HIV. New advances will be highlighted at Select Biosciences’ “RNAi World Congress” conference later this month in Philadelphia. Current progress includes enhancing delivery by using reversibly charged liposomes; engineering small, organic compounds called nanotransporters; and monitoring individually transfected cells. Other innovations are being made to profile and quantify miRNA as well as to harness the power of endogenous RNAi machinery such as Dicer.

Novel Delivery Strategy

One of the vexing problems of RNAi is the often inefficient and difficult delivery of the payload. Scientists at Novosom (www.novasom.com) are using a novel strategy to deliver antisense oligonucleotides that target cancer and inflammatory diseases such as rheumatoid arthritis.

According to Steffen Panzner, Ph.D., founder and CSO, “We are combining the use of our delivery technology called Smarticles® with an antisense oligonucleotide targeting CD40 mRNA. CD40 has been validated as a target for both inflammatory diseases and B-cell cancers. We have completed a succession of studies that established the in vivo safety of this formulation and even found it has superior efficacy to the use of TNF antibodies in a variety of models for inflammatory diseases.”

Dr. Panzner says the use of Smarticles is key to this strategy. “The key advantage of this approach is that it combines eminent safety with efficacy. This technology represents a novel class of charge-reversible liposomes. They are negatively charged under physiological conditions. However, once a cell absorbs the liposome, that is, endocytosis occurs, the pH drops to between 4 and 5. The vector surface becomes neutral and then eventually positively charged, which helps fusion and endosome escape of the oligonucleotide.”

Dr. Panzner notes that this unique type of delivery guarantees that the complex is stable and aggregate-free, which allows it stable passage through the bloodstream or, when targeted, to specific tissue. “A major problem with current cationic technologies is that they aggregate and may attach to unwanted tissue, so our development of a particle with both cationic and anionic properties clearly represents a step forward in the field.”

RXi Pharmaceuticals (a majority-owned subsidiary of CytRx; www.cytrx.com) is utilizing a different strategy for delivery—nanotransporters. Tod Woolf, Ph.D., CEO of RXi Pharmaceuticals, says, “We have licensed an RNA transporter technology system that efficiently delivers RNAi to certain tissues in vivo. In comparison to liposomes, nanotransporters offer the possibility of simpler formulation and more uniform particle size.”

Nanotransporters for Delivery

Nanotransporters, ~30-nm-sized particles with particular surface characteristics, can deliver RNAi compounds to cells. Dr. Woolf notes that the use of nanotransporters for RNAi delivery offers several advantages. “These are small, organic compounds and not a mix of sizes that one gets using liposomes. Another advantage is that the siRNA fits on the outside of the particle, not on the interior. As a result, we have seen 90 percent inhibition in vivo using this strategy.”

Sarah Haigh, Ph.D., senior scientist at Molecular Cytomics (www.molecular-cytomics.com), says its scientists are using a different approach to tackle delivery problems. “Many cells are hard to transfect or transduce with siRNAs. We used a lentiviral system with blood cells and found less than 30% efficiency. Additionally, when looking at individual cells within this population, significant differences in expression were observed. Many cells exhibited little or no knockdown, while others were more pronounced. Unfortunately, this heterogeneity can mask potentially significant findings.”

To overcome this problem, the company uses their Optical LiveCell™ Array. “This is the first slide-based technology that arrays individual, living, adherent, and nonadherent cells into designated wells,” Dr. Haigh explains. “Numerous micron-sized wells populate the slide in a honeycomb pattern to hold individual cells. Vital for the study of blood cells, nonadherent cells can be imaged easily because the cells settle into the wells via gravity and stay in place even under flow. The LiveCell Array allows you to study each cell within a population individually, record real-time responses, and correlate data obtained from living cells with postfixation studies. Furthermore, you only need a standard upright or inverted microscope.”

Another player in RNA-directed gene expression is miRNA. The miRNAs impact a variety of important biological processes.

Similar to their coding cousins, mRNAs, the expression of the noncoding miRNAs vary among tissues and developmental states. To better understand global miRNA expression requires the keen eye of high-throughput technologies, such as microarrays, that give one the ability to perform simultaneous analysis of a large number of analytes per sample.

Scientists at Molecular Devices (www.moleculardevices.com) are developing tools for performing genome-wide miRNA profiling of frozen and formalin-fixed, paraffin-embedded tissues. Rajiv Raja, Ph.D., director of molecular biology R&D, explains, “With the new discovery that miRNAs are involved in transcriptional regulation, there is an increasing focus on finding key species important for disease correlations. To do that requires looking at this from a cellular level.”

Dr. Raja indicates that it is necessary to dissect out the pure-cell populations to obtain high-quality data from tissue biopsies and other clinical specimens without interference from other dissimilar cell types within them.

“Microdissection helps to achieve this,” Dr. Raja reports. “The challenge is that one needs miRNA-extracting technologies to profile different types of samples such as frozen or fixed. Unfortunately, the technology is not quite there yet to isolate miRNAs efficiently from microscopic samples. We are looking to optimize the process to get good-quality miRNA. The field is going in this direction, and once good miRNA samples can be isolated, microarray or quantitative PCR can be performed.”

While microarrays enable multiplexing samples to gather information for hundreds of miRNAs in a single study, an alternate technology, PCR, is useful for understanding smaller subset of miRNAs. Scientists at Qiagen (www.qiagen.com) have developed an efficient and accurate method for the transcriptome-wide quantification of miRNA using real-time PCR based upon a SYBR green detection system.

“We sought to improve miRNA quantification and make it more sensitive and specific,” says Eric Lader, Ph.D., director of Qiagen. “A problem with microarray quantification is that they have low-throughput, in that, you have one sample on an expensive array whose dynamic range is limited. We developed a modified real-time PCR assay called miScript. It has two aspects. For the reverse transcription part of the PCR, we have added a common tag to the 3´ end of the primer that adds a binding site. The next step adds a second primer that is RNA-specific. The end result is that researchers, with small amounts of input RNA, can simultaneously quantify miRNAs, as well as mRNAs, using the same cDNA preparation.

“This avoids the necessity to prepare multiple cDNA preparations to quantify multiple miRNA species from the same RNA sample. Other advantages are that the assay has a broad dynamic range from several picograms to a microgram of input RNA.”

According to Dr. Lader, both microarray and PCR technologies have strengths and weaknesses. “PCR is most applicable when one has many samples but a relatively small number of assays to perform on each. The strength of microarray analysis is that a single sample can be queried with a large number of assays simultaneously. At Qiagen, we view these as complementary technologies.”

Dicer-directed Degradation

One protein involved in mediating RNAi is Dicer, an RNAse that processes long dsRNAs or hairpin RNAs into double-stranded siRNAs, typically 21–23 nucleotides in length. The resulting siRNAs trigger the formation of RNA-induced silencing complexes that cause RNA degradation.

“We were using long synthetic RNAs and stumbled across an interesting find using Dicer,” says Mark Behlke, M.D., Ph.D., vp of molecular genetics at Integrated DNA Technologies (www.idtdna.com). “In a collaboration with John Rossi’s group at the City of Hope (www.cityofhope.com), we found that Dicer cut our long synthetic dsRNAs efficiently into 21mers that produced a 10-fold boost in efficiency.”

Dr. Behlke says the problem was that it proved to be an unpredictable effect. “Sometimes this method enhanced potency, but at other times we lost potency. The challenge was to do so consistently. In other words, we wanted to be able predict which Dicer substrate worked best. Our studies found that using asymmetric dsRNAs would tighten up the process and resulted in a more predictable Dicing reaction.

“The asymmetric designs have a single 3´ overhang on the antisense strand. The PAZ domain of Dicer binds this 3´ overhang. Presenting Dicer with only a single overhang seems to help orientate the substrate RNA in a way that leads to predictable cleavage and more desirable results.”

Another issue is dose, notes Dr. Behlke. “It’s important to optimize how much of the siRNA you use and to employ the lowest concentration that results in good knockdown of your target gene. Dose-response optimization for each duplex can’t realistically be done if you are using libraries containing thousands of compounds. However, if you are studying a small number of genes, establishing dose-response curves early in the research program is a good idea, both for in vivo and in vitro studies. We see the greatest benefit from using the Dicer-substrate approach when using low doses.”

Previous articleStudy Finds Clearest Genetic Link to Obesity Risk
Next articleIntrogen Receives European Certification of its Production Facilities