Related to Monitoring Progress of Bioreactor Runs

• 
• Hybrid Connector
• Colder Products
• The AseptiQuik® STC for use in biopharmaceutical processes uses a hybrid combination of stainless equipment and single-use systems. The combined AseptiQuik sterile connector and Steam-Thru® II SIP connector can give biopharmaceutical manu
• 
• Bioreactor
• Infors HT
• The Terrafors-IS bioreactor works well for in situ sterilizable, laboratory-scale fermentation of solids and semi-solids. It provides aseptic conditions through automatic steam sterilization of a rotating drum. Maximal working volumes include 3–4 k
• 
• Benchtop Gel Incubators
• Caron Products
• New 10 cu. ft. benchtop GelJacket CO 2 incubators will be offered in a standard, nonrefrigerated model as well as a refrigerated model. GelJacket incorporates active gel-insulation technology inside every wall of the incubator chamber. The high-ene
• 
• Stem Cell Culture Medium
• STEMCELL Technologies
• TeSR™-E8™ is a feeder-free culture medium for human embryonic stem cells (ES cells) and human induced pluripotent stem cells (iPS cells). TeSR-E8 contains only the essential eight components required for maintenance of ES cells and iPS cells. TeSR-
• 
• Sterile Sampling Bottles
• EMD Millipore
• The NovaSeptum® 125, 250, and 500 mL bottles are designed for sterile sampling from biomanufacturing processes. The bottles feature a single-piece cap with an O-ring component for container closure. This design can protect product integrity an
• 
• Bioreactors
• Sarstedt
• miniPERM® bioreactors feature two compartments separated by a dialysis membrane for production of concentrated cell products of several mg/mL and biomass of more than 10 7 cells/mL in small volumes. A nutrient module with membrane-vented cap s
• 
• Hanging-Drop Plates
• 3D Biomatrix
• 96-well Perfecta3D® hanging-drop plates help researchers to form and test reproducible 3D cell cultures. The design of the Perfecta3D hanging-drop plates can simplify and streamline spheroid formation, culture, and subsequent testing of the 3D
• 
• Hematopoietic Cell Culture Medium
• STEMCELL Technologies
• StemSpan™-ACF has been developed for the in vitro culture and expansion of human hematopoietic cells. This medium contains recombinant proteins and synthetic components; it does not contain serum or other human- or animal-derived components. Recomb
• 
• Automated Bioreactor System
• TAP Biosystems
• The ambr 250™ is an automated bioreactor system for parallel fermentation or cell culture, using single-use 250 mL bioreactors controlled by an automated workstation. The system, developed with two major industrial partners, features increased ferm
• 
• Cell Culture Device
• Celartia
• The Petaka® G3 cell culture device uses ducted respiratory chamber technology to provide normal cellular environments for culture in room air. The ducted respiratory chamber limits the diffusion of oxygen into, and carbon dioxide out of, the b
• 
• Peristaltic Pumps
• Watson-Marlow Pumps Group
• Profibus-enabled peristaltic pumps are designed for process monitoring in validated cGMP production. The Bp pump brings Profibus networking to peristaltic pumping; customers can integrate this seal-less, valve-less pump technology into their Profib
• 
• 3D Cell Culture Prep
• BioTime
• The HyStem-C Stiffness Sampler Trio kit contains hyaluronan-based, synthetic extracellular matrices that can conveniently screen for the perfect in vitro environment for stem cells to proliferate. The Glycosan-branded kit contains three hydrogels o
• 
• Cell Culture Platform
• Cytoo
• The 2D+ Cell Culture Platform is based on the use of adhesive micropatterns in microplate wells to guide the cell architecture and behavior in culture. By defining the 2D topology of cell adhesion, the 2D+ Technology enables the fine control of the
• 
• Pressure Gauge
• Ashcroft
• The DG25 digital pressure gauge provides a 5 full-digit LCD in ranges up to 25,000 psi. Available in accuracies of 0.5% and 0.25% FS, this design boasts a minimum battery life of 2,000 hours. Standard features include an IP67 enclosure, selectable
• 
• Polyethylene Bottom-Entry Mixer
• Terracon
• A new bottom-entry nonmetallic mixing tank is now available and is being offered in capacities up to 1,000 liters. All models include a cylindrical, cone-bottom molded polyethylene tank for ease of cleaning and complete drainage, as well as a magne
• 
• Non-Animal Origin Media
• EMD Millipore
• Cellvento™ CHO-100 is a non-animal origin, chemically defined medium that can provide strong cell growth, high productivity, and lot-to-lot consistency. The new media formulation was designed for the long-term growth of CHO cells to express antibod
• 
• Roller Cell Culture Device
• Wheaton Industries
• The R2P® 2.0 roller system is a touchscreen, Ethernet network-capable roller culture device for the vaccine and biologics industry. The R2P 2.0 automatically controls and monitors the rotational speed of cell culture bottles; a single apparatu
• 
• Cell Culture Dishes
• Sarstedt
• lumox® cell culture dishes with ultra-thin film bases are only 25 µm thick and provide good optical quality, very low autofluorescence, and high UV transparency for microscopy and imaging. The lumox film is gas-permeable for gas exchange
• 
• Self-Cleaning Benchtop Bioreactor
• Infors HT
• Labfors 5 with LabCIP is a self-cleaning and self-sterilizing benchtop bioreactor. The LabCIP feature cleans and sterilizes the benchtop bioreactor automatically (e.g., overnight). This can reduce the downtime of the bioreactor and increase the tim
• 
• Stem Cell Culture and Differentiation Substrate
• Primorigen Biosciences
• Vitronectin XF™ is a defined xenobiotic-free cell attachment substrate for stem cell culture and differentiation. As a recombinant fusion protein containing the full-length human vitronectin sequence, Vitronectin XF is expressed in human cells unde