GEN Exclusives

More »

Assay Tutorials

More »
Jun 15, 2011 (Vol. 31, No. 12)

Improving Immunoassay Performance

New Tools Aim to Reduce Turnaround Times in Biotherapeutic Development and Production

  • Immunoassay Platform

    Click Image To Enlarge +
    Figure 1. The Gyros immunoassay platform

    The Gyros platform used (Figure 1) performs assays within nanoliter-scale microfluidic structures in a CD format. Samples and reagents flow through the Gyrolab Bioaffy CD microstructures under the influence of centrifugal and capillary action as the CDs are spun in the Gyrolab xP workstation.

    Working at the nanoliter scale means that the consumption of sample and reagents is drastically cut. Apart from obvious cost-saving on expensive reagents, availability of sample can become a limiting factor, especially as regulatory demands drive the need to perform an increasing number of different analyses on each sample.

    Each structure is prepacked with a 15 nanoliter volume affinity column containing Streptavidin-coated particles. These columns provide flexibility for use with a variety of specific assays (e.g., sandwich assay and indirect antibody assay). Implementation of microfluidic principles ensures a controlled flow of capture reagents, sample, and detection reagents, so that all samples within a single CD are processed in parallel.

    Parallel processing eliminates the occurrence of time-dependent artifacts that may be observed in a typical plate-based ELISA and ensures that samples are processed under uniform conditions. As each individual microstructure equates to one data point, cross talk is also eliminated.

    Within the workstation, a laser-induced fluorescence detector records fluorescence on each column. Accompanying control and analysis software is 21 CFR part 11 compliant and gives flexibility in run setup and data analysis, ensuring that assays can be developed and transferred through to GMP and GLP environments.

    Gyrolab Viewer software analyzes fluorescent signals within each microstructure, providing a qualitative visual of binding for each individual column (data point). The graphical image enables scientists to see individual binding responses, within one and a half minutes of run completion. This unique functionality provides an ideal support when selecting the best antibody pair during assay development. Using Gyrolab Viewer, up to ten different pairs or conditions can be evaluated in a single CD and compared within an hour. These individual column profiles are automatically stored and can be exported to overlay for more effective comparison.

  • Results

    Click Image To Enlarge +
    Figure 2. Broad dynamic ranges reduce the need for dilutions and sample repeats. [E. Bishop, MedImmune]

    In order to fully examine the advantages of the Gyros immunoassay platform compared with ELISA, MedImmune carried out a direct comparison between the two methodologies. The initial step in the process was to establish the assay conditions for the Gyrolab xP workstation, including creation of reagents and establishing basic conditions, optimizing conditions for maximum sensitivity, establishing positive and negative controls, and assay qualification.

    Whereas, endpoint assays such as ELISA provide a number from which to back calculate a standard curve, the Gyrolab Evaluator software module calculates results from a standard curve, while the Gyrolab Viewer module provides a qualitative visual of binding for each individual column or data point, providing support when selecting the best antibody pair.

    Using the Gyrolab platform, assay conditions were established in just one week, and the first assay comparison confirmed a much greater dynamic range than ELISA (Figure 2). Accuracy and precision were assessed and %CV was found to be within acceptable limits across the entire concentration range.

    A head-to-head comparison with ELISA using 38 in-process samples was run, and a detailed comparison of the specific HCP assay showed exactly where the significant improvements were achieved with the nanoliter-scale platform.

    Whereas just one day of testing, and two hours of analyst time was needed for the Gyrolab process, the ELISA method required eight days, and 50 hours of analyst time.

    An advantage was also seen in the increased dynamic range of 4 logs, compared to 2 logs for ELISA, a significant parameter when looking to reduce the number of assay repeats. The sample-prep process was also simplified as all samples could be diluted 1:2, rather than necessitating various dilutions based on each process step as in an ELISA assay.

  • Click Image To Enlarge +
    Figure 3. Comparison reveals improvements in turnaround times, analyst hours, and reagent consumption.

    One of the most powerful benefits experienced by MedImmune was the considerable increase in the efficiency of assay development, with the Gyros platform producing a 90% success rate on the first run compared to 50% with ELISA, and a sixfold increase in throughput.

    Overall, the Gyrolab workstation and ELISA were shown to produce corresponding read-outs for process-related impurities. When turnaround time, analyst hours, and reagent consumption were compared however, it was clear that transferring to the Gyrolab workstation decreased sample repeat rates and reagent consumption, and increased sample throughput and analyst productivity (Figure 3).



Related content

Jobs

GEN Jobs powered by HireLifeScience.com connects you directly to employers in pharma, biotech, and the life sciences. View 40 to 50 fresh job postings daily or search for employment opportunities including those in R&D, clinical research, QA/QC, biomanufacturing, and regulatory affairs.
 Searching...
More »

GEN Poll

More » Poll Results »

Tackling Climate Change

Do you think most companies will respond positively to the People’s Climate March?